Disabling Connection Tracking; About The Connection Tracking Report - McAfee SG310 Administration Manual

Firewall menu options
Connection tracking
[Conditional; required for Enabled Flood Rate Limiting] Enter an integer value equal to or greater than 1
7
in the Flood Rate Limit (per second) field. This is the number of connections per second to allow before
dropping new connections. If you are port forwarding to a busy internal server, increase or disable the
Flood Rate Limit setting as needed.
Click Submit.
8

Disabling connection tracking

For some specific implementations, it may be necessary to disable Connection Tracking. Doing so
necessitates the creation of custom firewall rules and should only be done by expert firewall administrators.
See Custom firewall rules and connection tracking

About the Connection Tracking Report

Use this report to view information about the current connections to a UTM Firewall appliance. The
connection information tracked in this report is configured in the Connection Tracking Configuration page
(Figure 198). The information you want to view within the report is configured within the Connection
Tracking Report page (Figure
Prerequisite: Connection logging must be enabled. See
Figure 199 Connection Tracking Report
You can select the Display checkboxes to indicate which fields you want to include in a report. The Filter
box is available for additional narrowing of your reporting criteria. You can optionally sort a specified
column in ascending order using the Sort by (Ascending) list.
McAfee UTM Firewall 4.0.4 Administration Guide
for details.
199).
Configuring connection tracking.
193