Allocating Network Storage For Web Cache - McAfee SG310 Administration Manual

Network Setup menu options
Web cache
Figure 139 webcache Properties
Launch Windows Explorer (Start > (All) Programs > Accessories > Windows Explorer) and open up
1
a folder or drive to dedicate as a network share for use by the UTM Firewall appliance's Web cache
(Figure 139).
Begin by disabling simple file sharing for this folder. From the Tools menu, select Folder Options. Click
2
the View tab and under the Advanced settings section clear Use simple file sharing
(Recommended). Click OK.
Next, share the folder. Right-click the folder and select Sharing and Security. Select Share this folder
3
and note the Share name. You can change this to something easier to remember if you want.
To set the security permissions of the newly created network share, click Permissions.
4
[Recommended] If you want to secure the network share with a user name and password, click Add and
5
type the user name of the account to be used by the UTM Firewall appliance. Click Check Names and
then click OK.
Select this account, or Everyone if you are not securing the network share with a user name and
6
password, and check Allow next to Full Control. Click OK and OK again to finish.

Allocating network storage for Web cache

Use this procedure to configure network storage for Web cache.
Prerequisite: Create a network folder to share. See
If you prefer, you can use local USB storage (SG565 model only) instead of Network Storage. For more
information, see Allocating local USB storage for Web
McAfee UTM Firewall 4.0.4 Administration Guide
Create a network share.
caching.
135