Adding New 3G Usb Modem Profiles - McAfee SG310 Administration Manual

Network Setup menu options
3G USB Modems
• Hardware – [Default. Most typical]. Requires the RTS/CTS (Request To Send/Clear To Send) pins on
the serial interface to be appropriately connected to the other device.
• Software – Select this option if flow control is performed by software.
Select the baud rate of the serial interface from the Baud Rate list. Available baud rates are:
4
• 9600
• 19200
• 38400
• 57600
• 115200
• 230400
Note: This setting must match the baud rate of the device connected to the serial interface.
Leave the Modem init. string default value unchanged.
5
Click Update.
6

Adding new 3G USB modem profiles

Occasionally, a modem may not present complete configuration information to the UTM Firewall device. In
these instances, it may be necessary to add a new USB profile This profile determines the modem's ID and
the serial interface that will be used to create Point-to-Point connections. Profiles are provided for several
common USB modems, but additional profiles can be added as needed.
To add a USB Modem profile:
Select Network Setup from the Network Setup menu, and click the USB tab. The USB tab contains a
1
list of all the USB Modem Profiles currently stored on the device
Figure 108 USB tab
Click New. The USB Modem Details dialog appears
2
108 McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 108).
(Figure 109).