System menu features
System Setup Menu
Figure 330 NTP Host
Adding an NTP peer
While NTP servers only offer the time to NTP clients, NTP peers both offer and accept time updates from
each other. A possible suitable NTP peer for the UTM Firewall appliance is another NTP server on your local
network.
From the System menu, click Date and Time > NTP Time Server tab. The NTP Time Server page
1
appears.
In the NTP Time Server pane, enter the IP Address of the NTP server.
2
Select Peer from the Type list.
3
Click Add. The NTP Peer is displayed in the Host list.
4
Security Policy tab
The security policy tab provides bootloader recovery options. These options control whether or not
administrators can network boot your UTM Firewall appliance
Figure 331 Security Policy tab
To set network boot options for your UTM Firewall appliance:
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure
331).
327