Domain Page; Radius Page - McAfee SG310 Administration Manual

System menu features
Users menu
Click Finish. The newly created group os added to the group list on the Groups tab, and can be selected
8
when creating or editing users.
Editing a group
From the System menu, click Users and select the Groups tab.
1
Select the edit icon next to the group you wish to edit. This opens the Edit Group Settings page.
2
Make the necessary changes to the groups ACLs and group memberships.
3
Click Finish.
4

Domain page

The Domain page (Figure
servers so that authentication can take place against the domain controller.
To configure your Windows NT workgroup settings:
From the System menu, click Users and select the Domain tab.
1
Figure 342 Domain tab
In the NT Domain field, enter domain name.
2
Enter the Primary Server.
3
Enter the Secondary Server.
4
Click Submit.
5

RADIUS page

The UTM Firewall appliance can be configured to access a central repository of users and passwords on a
RADIUS server to authenticate dial-in, PPTP VPN server, and L2TP VPN server connections. RADIUS can
also be used for Wifi 802.1x authentication (SG565 model only).
Multiple RADIUS servers can be added by clicking New or the Add Above or Add Below buttons. If
multiple RADIUS servers are configured, the order in which they are queried can be set by using the Move
Up and Move Down arrows next to each server.
McAfee UTM Firewall 4.0.4 Administration Guide
342) allows you to specify a Windows NT domain and primary and secondary
337