Ipv6 - McAfee SG310 Administration Manual

Network Setup menu options

IPv6

Click New. The Edit Static Hosts page appears
2
Figure 124 Edit Static Host page
Enter the IP address of the static host in the IP Address field.
3
Enter one or more hostnames that resolve to the Static Host IP address in the Hostnames field. Multiple
4
hostname must be separated by spaces. Fully-qualified domain names are also accepted.
Click Finish. The Static Host information is displayed in the edit list
5
Figure 125 Defined Static Host
Editing a static host
From the Network Setup menu, click Network Setup, select the DNS tab, then select the Static
1
Hosts tab. The Static Hosts page appears.
Select the edit icon for the static host you want to edit. The Edit Static Hosts page appears.
2
Make your changes and click Finish.
3
Deleting a static host
From the Network Setup menu, click Network Setup, select the DNS tab, and then select the Static
1
Hosts tab. The Static Hosts page appears.
Select the delete icon for the static host you want to delete. You are prompted to confirm the delete. Click
2
OK.
IPv6
The IPv6 page allows you to enable IPv6 routing for the appliance. When IPv6 routing is enabled, the
following actions are performed:
• Site-local addresses are assigned to LAN connections.
• The site-local DNS server address (fec0:0:0:ffff::1/64) is assigned to LAN connections if the DNS proxy
is enabled.
• Router advertisements are sent on LAN connections.
• 6to4 tunnels are created on Internet connections.
122 McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 124).
(Figure 125).