Configuring A Dialout Connection On The Com Port - McAfee SG310 Administration Manual

Network Setup menu options

Configuring a dialout connection on the COM port

Figure 48 BigPond Advance Cable Modem Provider
• If you chose @Home as shown in
click Finish.
Figure 49 @Home Cable Modem Provider
Configuring a dialout connection on the COM port
Use this procedure to configure a dialout Internet connection on the COM (serial) port of the UTM Firewall
appliance. You can connect to the Internet using a regular dialup or ISDN service. Dialout and ISDN
connections have the interface firewall class of Internet.
Caution: Do not plug an ISDN connection directly into your UTM Firewall appliance. You must first connect a
terminal adaptor.
To connect to an ISDN line, the UTM Firewall appliance requires an intermediate device called a Terminal
Adapter (TA). A TA connects to your ISDN line and has a serial port that connects to your UTM Firewall
appliance.
By default, Dialout/ISDN connections are treated as always on and are kept up continuously. Alternatively,
you can choose to only bring the connection up when PCs on the LAN, DMZ, or Guest network (via a VPN
tunnel) are trying to reach the Internet. For instructions, refer to
Note: Concurrent Dialin and Dialout configurations are not supported at this time.
56 McAfee UTM Firewall 4.0.4 Administration Guide
Figure 49, enter a Connection Name [optional], Hostname, and
Enabling dial on demand for a connection.