Allocating Local Usb Storage For Web Caching; Configuring Web Cache Peers - McAfee SG310 Administration Manual

Network Setup menu options
Web cache
http://192.168.0.1/proxy.pac
Click OK.
4

Allocating local USB storage for Web caching

Use this procedure to configure local USB storage for the Web cache.
Note: Local USB storage is applicable to the SG565 model only.
If you prefer, you can use Network storage for the Web cache instead. See
Web cache.
Prerequisite: Attach a USB storage device to a USB port.
From the Network Setup menu, click Web Cache, select the Storage tab, and then select the Local
1
Storage tab. The Local USB Storage page appears
Figure 143 Web Cache - Local USB Storage
Enter the cache size in the Cache Size field. The size should be at least as big as the Cache size on the
2
Main page (see
Select the partition or device to use from the Device list.
3
Click Submit.
4

Configuring Web Cache Peers

Use this procedure to configure a Web cache for peer parent and sibling caches. The Web cache boosts the
performance of Web site access.
From the Network Setup menu, click Web Cache, select the Advanced tab, and then select the Peers
1
tab. The Peers tab appears
Figure 144 Web Cache page Peers tab
Click New. The Peers edit page appears
2
138 McAfee UTM Firewall 4.0.4 Administration Guide
Web Cache — Main tab) and not more than 90% of the total size of the share.
(Figure 144).
(Figure 143).
(Figure 145).
Allocating network storage for