Accessing The Adsl Connection Methods Page - McAfee SG310 Administration Manual

Network Setup menu options
ADSL

Accessing the ADSL connection methods page

From the Network Setup menu, click Network Setup. The Connections page appears.
1
For the connection you want to configure ADSL on, select ADSL from the Change Type list. Not all
2
connections have this option available, such as the COM serial port. The ADSL tab opens and displays the
ADSL Connection Methods page
Figure 41 ADSL Connection Methods
Select the connection method you need to use and click Next.
3
Continue with the procedure you need to use to connect:
4
• Autodetecting your ADSL connection
• Connecting ADSL via PPPoE
• Connecting ADSL via PPTP
• Connecting ADSL via DHCP
• Manually assigning your ASDL settings
Autodetecting your ADSL connection
Use this procedure to autodetect settings for your ADSL. Autodetect does not work for PPTP connections.
From the Network Setup menu, click Network Setup. On the Connections page, select ADSL from the
1
Change Type list. The ADSL Connection Methods page appears.
Select the Auto detect ADSL connection type option and click Next.
2
A message reminds you to hook up your equipment. Click Next.
3
Depending on what the appliance detects, either the ADSL DHCP Configuration page appears (see
4
Figure 44 on page
Complete the fields and click Finish.
5
If autodetect succeeds, additional configuration tabs appear, such as the VLAN configuration or Ethernet
configuration tab (depending on your connection type), Aliases, and IPv6. See
VLAN, Aliases
If autodetection fails, your DSL modem might not be configured correctly for your connection type, or your
DSL service has not yet been provisioned by your telecommunications company. Try the manual settings
procedure as well.
50 McAfee UTM Firewall 4.0.4 Administration Guide
(Figure
53), or the PPPoE page appears
tab, and Enabling IPv6 for a
41).
(Figure 42).
connection.
Ethernet Configuration tab,