Enabling The Snmp Agent - McAfee SG310 Administration Manual

System menu features
Management menu
Figure 365 Edit Control Center Device Attributes
Enter a name in the Attribute Name field. The name must begin with an alpha character.
3
[Optional] Enter a value in the Attribute Value field.
4
Click Finish. The device attribute is displayed in the attributes list
5
Figure 366 Control Center Device Attributes edit list
Editing a Control Center attribute
From the System menu, click Management > Control Center Management > Control Center
1
Attributes tab. The Control Center Attributes page appears.
Click the edit icon for the attribute you want to edit. The Edit Control Center Device Attributes page
2
appears.
Make your changes and click Finish.
3
Deleting a Control Center attribute
From the System menu, click Management > Control Center Management > Control Center
1
Attributes tab. The Control Center Attributes page appears.
Click the delete icon for the attribute you want to delete. You are prompted to confirm the delete.
2
Click OK.
3

Enabling the SNMP agent

Use this procedure to enable and configure the SNMP agent. The SNMP agent allows external SNMP
management software to query the appliance for management information.
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 366).
353