Configuring Browsers To Use The Web Cache - McAfee SG310 Administration Manual

Network Setup menu options
Web cache
From the Network Setup menu, click Web Cache, select the Storage tab, and then select the
1
Network Storage tab. The Web Cache Network Storage page appears
Figure 140 Network Storage (Web caching)
Select the Use share checkbox.
2
Enter the cache size in the Cache Size field. The size should be at least as big as the Cache size on the
3
Main page and not more than 90% of the total size of the share.
Enter the path of the network share in the Share field using the following format:
4
\\HOSTNAME\sharename
If you allowed Full Control to Everyone on the network share drive, leave the Username and Password
5
fields blank and go to the last step. Otherwise, if the dedicated user account must authenticate to the
network share, continue with the next step.
Enter the username of the dedicated user in the Username field. The user must be able to read to and
6
write from the network share.
Enter the password for authentication with the network share in the Password field.
7
Enter the password again in the Confirm Password field. The password field entries must match.
8
Click Submit. You can now configure personal computers on your LAN to use the Web cache. See
9
Configuring browsers to use the Web

Configuring browsers to use the Web cache

Once the Web cache has been set up, personal computers on the LAN must have their browsers configured
appropriately. In Internet Explorer, the configuration must be set manually. In Mozilla Firefox, you can
specify the UTM Firewall URL to the .pac file for automatic configuration.
136 McAfee UTM Firewall 4.0.4 Administration Guide
cache.
(Figure 140).