Configuring The Windows Client For Dhcp - McAfee SG310 Administration Manual

Network Setup menu options
DHCP Server
Make your changes and click Finish.
3

Configuring the Windows client for DHCP

Use this procedure to set the TCP/IP properties for the LAN interface to obtain an IP address automatically.
The Windows client must be configured if you have configured a DHCP Server or Relay. This procedure is
for the Windows XP Professional operating system. You must have administrative rights to configure
Windows XP as a DHCP client.
Click Start > Control Panel > Network Connections > Local Area Connection. The Local Area
1
Connection Status dialog box appears
Figure 135 Windows Local Area Connection Status dialog box
Click Properties. The Local Area Connection Properties dialog box is displayed
2
Figure 136 Windows Local Area Connection Properties dialog box
Select Internet Protocol (TCP/IP) in the connection item list and click Properties. The Internet
3
Protocol (TCP/IP) Properties dialog box appears
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 135).
(Figure 137).
(Figure 136).
131