Uploading A Mcafee Web Gateway Certificate And Key; Copying And Pasting A Mcafee Web Gateway Certificate And Key - McAfee SG310 Administration Manual

Firewall menu options
Access control
[Optional] Clearing the Allow access to newly defined categories checkbox restricts access to the
4
categories you did not block when configuring content filtering. Selecting the checkbox allows access to
any categories added after content filtering is configured.
[Optional] To send user names to the McAfee Web Gateway reporting service, select the Identify users
5
by account checkbox. In order for this field to have any effect, the Require User Authentication
checkbox on the Main tab must be selected. For information, refer to
not identify users by account, the reports are based upon IP addresses.
Note: If you want to bypass content filtering for a user, select the Bypass content filtering checkbox in the
user's configuration (System > Users > Local Users tab). For more information, see
are additional settings required to subject the user to other access controls.
[Recommended] To cache the content rating results for improved performance, select the Enable Cache
6
checkbox.
Click Submit.
7
Disabling McAfee Web Gateway content filtering
From the Firewall menu, select Access Control > Web Filtering > Content Filtering. The Web
1
Filtering URL Filter Service page appears.
Clear the Enable content filtering checkbox.
2
Click Submit.
3

Uploading a McAfee Web Gateway certificate and key

Use this procedure to upload the McAfee Web Gateway certificate and private key for your UTM Firewall
appliance. Until you upload a valid certificate and key for the McAfee Web Gateway filter service, the
message "Both the certificate and the private key are missing or invalid" appears at the top of every Web
Filtering page. As an alternative to uploading, you can also copy and paste the certificate and private key
information. See Copying and pasting a McAfee Web Gateway certificate and
From the Firewall menu, select Access Control > Web Filtering > Certificate Upload. The
1
Certificate Upload page appears
Figure 221 Web Filtering — Certificate Upload tab
Click Browse to locate the certificate file, or enter the file name and path directly in the Certificate field.
2
Click Browse to locate the private key file, or enter the file name and path direct in the Private Key field.
3
Click Submit. The message that a valid certificate and private key are installed is displayed, along with
4
the expiration date of the certificate.

Copying and pasting a McAfee Web Gateway certificate and key

Use this procedure to copy and paste a certificate and key into the text boxes provided if you received them
in text format. Otherwise, use the Certificate Upload page. For instructions, see
Gateway certificate and
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 221).
key.
Enabling access control. If you do
Creating a user. There
key.
Uploading a McAfee Web
219