Enabling Remote Management By Mcafee Utm Firewall Control Center - McAfee SG310 Administration Manual

System menu features
Management menu
From the System menu, click Management and select the Command Line tab
1
Figure 362 Command Line tab
Select or clear the appropriate checkboxes.
2
• Selecting the Enable Telnet Service checkbox allows telnet access to the UTM Firewall appliance.
• Selecting the Enable SSH Service checkbox allows ssh access to the UTM Firewall appliance.
Enter the port the SSH service will run on into the Port for SSH field. The default is port 22, but selecting
3
a different port helps hide the service from would-be attackers.
Click Submit to save the configuration changes.
4

Enabling remote management by McAfee UTM Firewall Control Center

Use this procedure to enable remote management by a McAfee
From the System menu, click Management > Control Center Management tab. The Control Center
1
Configuration page appears
Figure 363 Control Center Configuration page
Select the Enable Central Management checkbox.
2
In the IP Address of Control Center field, enter the IP address of the host on which the Control Center
3
is running.
[Conditional] If you have the RSA public key for the Control Center, click the Browse button next to the
4
Upload public key field, and navigate to the public key file.
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 363).
(Figure
® UTM Firewall Control Center appliance.
362).
351