Policy Routes Page - McAfee SG310 Administration Manual

Network Setup menu options
Routes
Figure 112 Defined Static Routes

Policy Routes page

A policy route allows packets to be routed via a specific gateway based on their incoming interface, source
address, destination address, and service.
Click New to define the first route, as shown in
Figure 113 Policy Routes page — initial view
Thereafter, you can also use the add above or add below icon to add a route above or below an existing
route. If you use the New button, the route is added to the bottom of the list. Use the up or down arrows to
reposition a route. For more information on icons, see
routes, you can edit and delete the routes as necessary.
Figure 114 Policy Routes page — populated view
Creating a policy route
Use this procedure to create a new policy route.
From the Network Setup menu, click Network Setup, select the Routes tab, and then select the
1
Policy Routes tab.
If this is the first route, click New. Otherwise, you can click the add above or below icon to add the route
2
in the location you want above or below an already defined route. The Edit Policy Route page appears
(Figure 115).
McAfee UTM Firewall 4.0.4 Administration Guide
Figure 113:
Interface icons. Once the page is populated with
111