Network Tests Page - McAfee SG310 Administration Manual

System menu features
Diagnostics menu
From the Diagnostics menu, click System Log tab > Email Delivery tab. The Email System Log
1
Delivery page appears
Figure 372 Email System Log Delivery page
Select the Enable Email Logging checkbox.
2
Enter the address of an Email Server (SMTP server) that accepts email for forwarding.
3
Enter the Email Address(es) to which to send the system log messages.
4
Specify the Sender Email address that System Log messages are sent from.
5
Set the Filter Level to only send syslog messages at the selected level or above.
6
Specify the number of seconds to wait after receiving a system log message before sending an email in
7
Delay to Send(s). This allows multiple system log messages to accumulate before sending an email
containing all messages.
Messages per Email is the maximum number of system log messages that are allowed to accumulate
8
before sending the email. The default setting of 0 means unlimited, and is typically appropriate for all
systems except those that experience heavy traffic.
Click Submit.
9

Network Tests page

The basic network tests of ping and traceroute help test the current functionality of the UTM Firewall
appliance (Figure 373).
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 372).
359