Supported Paper Types; Storing And Handling Paper - Xerox WorkCentre 5020DN User Manual

3 Loading Paper

Supported Paper Types

The following table shows the paper types that are supported by each of the trays and
the Duplex Module.
Paper Type
Plain Paper
Recycled Paper
Transparencies
Labels
Heavyweight
O: Available
X: Not available
*: Paper weight is 70 - 90 g/m

Storing and Handling Paper

Storing paper
• Store paper in dry conditions. Paper that has absorbed moisture can cause paper
jams and image quality deterioration.
• Once you remove the packaging from the paper, keep the unused paper wrapped.
To reduce moisture, apply preventive measures such as placing desiccant (moisture
absorber) in the storage area.
• Paper should be stored on a flat surface to prevent creasing or warping.
Loading paper into the trays
• Align the edges of the paper stack neatly before loading it in the trays.
• Do not use paper that is folded, creased, curled, or badly damaged.
• Do not load paper of mixed sizes together in the trays.
• Transparencies and labels often cause paper jams if any sheets are stuck together.
Fan the edges well before loading.
• When continuously printing onto transparencies, remove them from the Output Tray
every 20 sheets or so to prevent them from sticking together.
• When loading labels in the tray, if any of the labels have already been peeled off or
cut off, it may cause a paper jam.
40
Weight
Tray 1
2
(g/m )
60 - 90 O
O
- X
- O
90 - 110 X
2
for the Duplex Module
Bypass
Tray 2
Tray
O O
O O
X O
O O
X O
Duplex
Module
O*
O
X
X
X