Supported Paper Types; Storing And Handling Paper - Xerox WorkCentre 5020 User Manual

Supported Paper Types

The following table shows the paper types that are supported with each of the trays and
Duplex Module.
Paper Type
Plain Paper
Recycled Paper
Transparency
Labels
Heavyweight
O: Available
X: Not available
*: Paper weight is 70 - 90 g/m

Storing and Handling Paper

Storing paper
• Store paper in dry conditions. Paper that has absorbed moisture can cause paper
jams and image quality deterioration.
• Once you remove the packaging from paper, keep the unused paper wrapped. To
reduce moisture, apply preventive measures such as by placing desiccant (moisture
absorber) in the storage area.
• Paper should be stored on a flat surface to prevent creasing or warping.
Loading paper into the trays
• Align the edges of the paper stack neatly before loading it in the trays.
• Do not use paper that is folded, creased, curled, or heavily damaged.
• Do not load paper of mixed sizes together in the trays.
• Transparency paper and label paper often cause paper jams if any sheets of paper
are stuck together. Fan the edges of these types of paper well before loading.
• When continuously printing onto transparencies, remove transparencies from the
Output Tray every 20 sheets or so to prevent them from sticking to one another.
• When loading label paper in the tray, if any labels have already been peeled off or
cut off, it may cause a paper jam.
Xerox WorkCentre 5016/5020 User Guide
Weight
Tray 1
2
(g/m )
60 - 90 O
O
- X
- O
90 - 110 X
2
for the Duplex Module
Supported Paper Sizes and Types
Bypass
Tray 2
Tray
O O
O O
X O
O O
X O
Duplex
Module
O*
O
X
X
X
41