Show Alarms - Cisco NCS 1004 Command Reference Manual

show alarms

show alarms
To display alarms in brief or detail, use the show alarms command in XR EXEC mode or Administration
EXEC mode.
show alarms brief [card [ location location ] | rack | system ] [ active | history ] ]
show alarms detail [card [ location location ]| rack | system ] [ active | clients | history | stats ] ]
Syntax Description
brief
card
rack
system
location location
active
history
detail
clients
stats
None
Command Default
XR EXEC
Command Modes
Administration EXEC
Command History
Release
Release
7.0.1
This command displays the alarms in brief or detail. The command displays only the administration alarms
Usage Guidelines
in admin EXEC mode and all the alarms in XR EXEC mode.
Example
The following example shows the output of the show alarms command.
sysadmin-vm:0_RP0# show alarms
Wed Mar
-----------------------------------------------------------------------------------------------
Active Alarms
Command Reference for Cisco NCS 1004
68
Displays alarms in brief.
Displays card scope alarms related data.
Displays rack scope alarms related data.
Displays system scope alarms related data.
Specifies the target location in the rack/slot notation.
Displays active alarms.
Displays alarm history.
Displays alarms in detail.
Displays clients associated with the service.
Displays service statistics.
Modification
This command was introduced.
20 05:25:53.146 UTC+00:00
Commands