Clearing Statistics And Counters; Monitoring Asr 5000 Hardware Status - Cisco ASR 5000 Administration Manual

Monitoring the System
To do this:
Display ORBEM Information
View ORBEM client status
View ORBEM session information
View individual ORBEM sessions
View ORBEM status information
View Port Counters
Display Port Datalink Counters
View datalink counters for a specific port
Display Port Network Processor Unit (NPU) Counters
View NPU counters for a specific port
Important
Important

Clearing Statistics and Counters

It may be necessary to periodically clear statistics and counters in order to gather new information. The system
provides the ability to clear statistics and counters based on their grouping (PPP, MIPHA, MIPFA, etc.).
Statistics and counters can be cleared using the CLI clear command. Refer to the Exec Mode Commands
chapter in the Command Line Interface Reference for detailed information on using this command.

Monitoring ASR 5000 Hardware Status

Use the commands contained in this section to monitor the status of the hardware components in the chassis.
For output descriptions for most of the commands, refer to the Statistics and Counters Reference.
Important
The commands or keywords/variables that are available are dependent on platform type, product version,
and installed license(s).
Some commands have different outputs depending on the platform type.
The commands or keywords and variables are dependent on platform type, product version, and installed
license(s). Some commands produce different outputs, depending on the platform type.
Enter this command:
show orbem client id
show orbem session table
show orbem session id orbem
show orbem status
show port datalink counters slot#/port#
show port npu counters slot#/port#
ASR 5000 System Administration Guide, StarOS Release 21.1
Clearing Statistics and Counters
153