Usb Tape Drive/Usb Rdx Drive; Installing A Usb Drive In A 6X 3.5" Variant; Installing A Usb Drive In A Drive Cage - Fujitsu PRIMERGY RX300 S6 Options Manual

USB tape drive/USB RDX drive

7.3 USB tape drive/USB RDX drive
I
A USB drive can only be installed in the 6x 3.5" and 8x 2.5" hard disk
drive variant.
Ê Open the server as described in
Ê Remove the fan box as described in
page 31.
Ê Remove the dummy covers or drives from the two upper slide-in modules
(see operating manual, section "CSS components").
7.3.1

Installing a USB drive in a 6x 3.5" variant

7.3.1.1

Installing a USB drive in a drive cage

Installing a USB tape drive in a drive cage
I
The USB tape drive and USB RDX drive are installed in the USB drive
module using the same method.
Figure 36: USB drive cage
66
section "Opening the server" on page
section "Removing the fan box" on
Options Guide
RX
29.
300 S6