ZyXEL Communications UAG4100 User Manual page 145

Table 63 Configuration > Network > Interface > Bridge > Edit (continued)
LABEL DESCRIPTION
First WINS Type the IP address of the WINS (Windows Internet Naming Service) server that you
Server, Second
want to send to the DHCP clients. The WINS server keeps a mapping table of the
WINS Server
computer names on your network and the IP addresses that they are currently using.
Default Router If you set this interface to DHCP Server, you can select to use either the interface's IP
address or another IP address as the default router. This default router will become the
DHCP clients' default gateway.
To use another IP address as the default router, select Custom Defined and enter the
IP address.
Lease time Specify how long each computer can use the information (especially the IP address)
before it has to request the information again. Choices are:
infinite - select this if IP addresses never expire
days, hours, and minutes - select this to enter how long IP addresses are valid.
Extended This table is available if you selected DHCP server.
Options
Configure this table if you want to send more information to DHCP clients through DHCP
packets.
Add Click this to create an entry in this table. See
Edit Select an entry in this table and click this to modify it.
Remove Select an entry in this table and click this to delete it.
# This field is a sequential value, and it is not associated with any entry.
Name This is the name of the DHCP option.
Code This is the code number of the DHCP option.
Type This is the type of the set value for the DHCP option.
Value This is the value set for the DHCP option.
Enable IP/MAC Select this option to have this interface enforce links between specific IP addresses and
Binding
specific MAC addresses. This stops anyone else from manually using a bound IP address
on another device connected to this interface. Use this to make use only the intended
users get to use specific IP addresses.
Enable Logs for Select this option to have the UAG generate a log if a device connected to this interface
IP/MAC Binding
attempts to use an IP address that is bound to another device's MAC address.
Violation
Static DHCP Configure a list of static IP addresses the UAG assigns to computers connected to the
Table
interface. Otherwise, the UAG assigns an IP address dynamically using the interface's
IP Pool Start Address and Pool Size.
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
# This field is a sequential value, and it is not associated with a specific entry.
IP Address Enter the IP address to assign to a device with this entry's MAC address.
MAC Address Enter the MAC address to which to assign this entry's IP address.
Description Enter a description to help identify this static DHCP entry. You can use alphanumeric
and ()+/:=?!*#@$_%- characters, and it can be up to 60 characters long.
Connectivity Check The interface can regularly check the connection to the gateway you specified to make
sure it is still available. You specify how often the interface checks the connection, how
long to wait for a response before the attempt is a failure, and how many consecutive
failures are required before the UAG stops routing to the gateway. The UAG resumes
routing to the gateway the first time the gateway passes the connectivity check.
Chapter 10 Interfaces
UAG4100 User's Guide
145
Section 10.3.3 on page 124.