ZyXEL Communications UAG4100 User Manual page 318

Table 150 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL DESCRIPTION
Radius Server Type Select Internal to use the UAG's internal authentication database, or External to use
an external RADIUS server for authentication.
Primary / Select this to have the UAG use the specified RADIUS server.
Secondary Radius
Server Activate
Radius Server IP Enter the IP address of the RADIUS server to be used for authentication.
Address
Radius Server Port Enter the port number of the RADIUS server to be used for authentication.
Radius Server Enter the shared secret password of the RADIUS server to be used for authentication.
Secret
802.1X Select this to enable 802.1x secure authentication.
Auth. Method This field is available only when you set the RADIUS server type to Internal.
Select an authentication method if you have created any in the Configuration >
Object > Auth. Method screen.
Reauthenticatio Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited
n Timer
requests.
The following fields are available if you set Security Mode to wep.
Idle Timeout Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Authentication Type Select a WEP authentication method. Choices are Open or Share key.
Key Length Select the bit-length of the encryption key to be used in WEP connections.
If you select WEP-64:
•
or
•
If you select WEP-128:
•
or
•
Key 1~4 Based on your Key Length selection, enter the appropriate length hexadecimal or
ASCII key.
The following fields are available if you set Security Mode to wpa, wpa2 or wpa2-mix.
PSK Select this option to use a Pre-Shared Key with WPA encryption.
Pre-Shared Key Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
Cipher Type Select an encryption cipher type from the list.
•
•
•
Chapter 32 AP Profile
Enter 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example,
0x11AA22BB33) for each Key used.
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for
example, MyKey) for each Key used.
Enter 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example,
0x00112233445566778899AABBCC) for each Key used.
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for
example, MyKey12345678) for each Key used.
auto - This automatically chooses the best available cipher based on the cipher in
use by the wireless client that is attempting to make a connection.
tkip - This is the Temporal Key Integrity Protocol encryption method added later to
the WEP encryption protocol to further secure. Not all wireless clients may support
this.
aes - This is the Advanced Encryption Standard encryption method. It is a more
recent development over TKIP and considerably more robust. Not all wireless clients
may support this.
UAG4100 User's Guide
318