Address Add/Edit Screen - ZyXEL Communications UAG4100 User Manual

Figure 214 Configuration > Object > Address > Address
The following table describes the labels in this screen. See
information as well.
Table 153 Configuration > Object > Address > Address
LABEL
Configuration
Add
Edit
Remove
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
#
Name
Type
IPv4 Address

33.2.1 Address Add/Edit Screen

The Configuration > Object > Address Add/Edit screen allows you to create a new address or
edit an existing one. To access this screen, go to the Address screen (see
321), and click either the Add icon or an Edit icon in the Configuration section.
Figure 215 IPv4 Address Configuration > Add/Edit
Chapter 33 Addresses
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
use the entry. See Section 10.3.2 on page 123
This field is a sequential value, and it is not associated with a specific address.
This field displays the configured name of each address object.
This field displays the type of each address object. "INTERFACE" means the object uses
the settings of one of the UAG's interfaces.
This field displays the IPv4 addresses represented by each address object. If the object's
settings are based on one of the UAG's interfaces, the name of the interface displays first
followed by the object's current address settings.
UAG4100 User's Guide
Section 33.2.1 on page 322
for an example.
322
for more
Section 33.2 on page