Edit Remote Server Log Settings - ZyXEL Communications UAG4100 User Manual

Table 199 Configuration > Log & Report > Log Settings > Edit (USB Storage) (continued)
LABEL
Log Category
Selection
OK
Cancel

41.3.4 Edit Remote Server Log Settings

The Log Settings Edit screen controls the detailed settings for each log in the remote server
(syslog). Go to the Log Settings Summary screen (see
remote server Edit icon.
Chapter 41 Log and Report
DESCRIPTION
This field displays each category of messages. The Default category includes debugging
messages generated by open source software.
Select what information you want to log from each Log Category (except All Logs; see
below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information,
alerts, and debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
UAG4100 User's Guide
412
Section 41.3.1 on page 406), and click a