Creating/Editing An Authentication Policy - ZyXEL Communications UAG4100 User Manual

Table 101 Configuration > Web Authentication (continued)
LABEL
Authentication
Description
Apply
Reset

24.2.1 Creating/Editing an Authentication Policy

Open the Configuration > Web Authentication screen, then click the Add icon or select an entry
and click the Edit icon in the Web Authentication Policy Summary section to open the Auth.
Policy Add/Edit screen. Use this screen to configure an authentication policy.
Figure 149 Configuration > Web Authentication > Add
The following table gives an overview of the objects you can configure.
Table 102 Configuration > Web Authentication > Add
LABEL
Create new
Object
Enable Policy
Description
Chapter 24 Web Authentication
DESCRIPTION
This field displays the authentication requirement for users when their traffic matches this
policy.
unnecessary - Users do not need to be authenticated.
required - Users need to be authenticated. They must manually go to the login screen.
The UAG will not redirect them to the login screen.
force - Users need to be authenticated. The UAG automatically displays the login screen
whenever it routes HTTP traffic for users who have not logged in yet.
If the entry has a description configured, it displays here. This is n/a for the default policy.
Click this button to save your changes to the UAG.
Click this button to return the screen to its last-saved settings.
DESCRIPTION
Use to configure any new settings objects that you need to use in this screen.
Select this check box to activate the authentication policy. This field is available for user-
configured policies.
Enter a descriptive name of up to 60 printable ASCII characters for the policy. Spaces are
allowed. This field is available for user-configured policies.
UAG4100 User's Guide
226