ZyXEL Communications UAG4100 User Manual page 102

The following table describes the labels in this screen.
Table 42 Monitor > Log > View AP Log
LABEL DESCRIPTION
Show/Hide Filter Click this to show or hide the AP log filter.
Select an AP Select an AP from the list and click Query to view its log messages.
Log Query This indicates the current log query status.
Status
init - Indicates the query has not been initialized.
querying - Indicates the query is in process.
fail - Indicates the query failed.
success - Indicates the query succeeded.
AP Information This displays the MAC address for the selected AP.
Log File Status This indicates the status of the AP's log messages.
Last Log Query This indicates the last time the AP was queried for its log messages.
Time
Display Select the log file from the specified AP that you want displayed.
Note: This criterion only appears when you Show Filter.
Priority Select a priority level to use for filtering displayed log messages.
Note: This criterion only appears when you Show Filter.
Source Address Enter a source IP address to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Destination Enter a destination IP address to display only the log messages that include it.
Address
Note: This criterion only appears when you Show Filter.
Source Interface Enter a source interface to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Destination Enter a destination interface to display only the log messages that include it.
Interface
Note: This criterion only appears when you Show Filter.
Service Select a service type to display only the log messages related to it.
Note: This criterion only appears when you Show Filter.
Keyword Enter a keyword to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Protocol Select a protocol to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Search Click this to start the log query based on the selected criteria. If no criteria have been
selected, then this displays all log messages for the specified AP regardless.
Email Log Now Click this open a new e-mail in your default e-mail program with the selected log attached.
Refresh Click this to refresh the log table.
Clear Log Click this to clear the log on the specified AP.
# This field is a sequential value, and it is not associated with a specific log message.
Time This indicates the time that the log messages was created or recorded on the AP.
Chapter 7 Monitor
UAG4100 User's Guide
102