Tables And Lists - ZyXEL Communications UAG4100 User Manual

Table 6 Configuration Menu Screens Summary (continued)
FOLDER OR LINK TAB
SNMP
Language
Log & Report
Email Daily
Report
Log Settings
Maintenance Menu
Use the maintenance menu screens to manage configuration and firmware files, run diagnostics,
and reboot or shut down the UAG.
Table 7 Maintenance Menu Screens Summary
FOLDER OR
LINK
File Manager
Diagnostics
Packet Flow
Explore
Reboot
Shutdown

1.4.4 Tables and Lists

Web Configurator tables and lists are flexible with several options for how to display their entries.
Click a column heading to sort the table's entries according to that column's criteria.
Figure 9 Sorting Table Entries by a Column's Criteria
Click the down arrow next to a column heading for more options about how to display the entries.
The options available vary depending on the type of fields in the column. Here are some examples
of what you can do:
Chapter 1 Introduction
FUNCTION
Configure SNMP communities and services.
Select the Web Configurator language.
Configure where and how to send daily reports and what reports to
send.
Configure the system log, e-mail logs, and remote syslog servers.
TAB FUNCTION
Configuration File Manage and upload configuration files for the UAG.
Firmware Package View the current firmware version and to upload firmware.
Shell Script Manage and run shell script files for the UAG.
Diagnostic Collect diagnostic information.
Packet Capture Capture packets for analysis.
Core Dump Connect a USB device to the UAG and save the UAG operating system
kernel to it here.
System Log Connect a USB device to the UAG and archive the UAG system logs to it
here.
Routing Status Check how the UAG determines where to route a packet.
SNAT Status View a clear picture on how the UAG converts a packet's source IP
address and check the related settings.
Restart the UAG.
Turn off the UAG.
UAG4100 User's Guide
28