ZyXEL Communications UAG4100 User Manual page 411

Figure 286 Configuration > Log & Report > Log Settings > Edit (USB Storage)
The following table describes the labels in this screen.
Table 199 Configuration > Log & Report > Log Settings > Edit (USB Storage)
LABEL DESCRIPTION
Duplicate logs to Select this to have the UAG save a copy of its system logs to a connected USB storage
USB storage (if device. Use the Active Log section to specify what kinds of messages to include.
ready)
Enable log keep Select this option to have the UAG save a copy of its system logs to a connected USB
duration storage device on a daily basis.
Keep duration Specify how long the UAG is to keep the copy of system logs in the connected USB storage
device before discarding it.
Active Log
Selection Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and
alerts for all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
# This field is a sequential value, and it is not associated with a specific entry.
Chapter 41 Log and Report
UAG4100 User's Guide
411