Adding/Editing A Walled Garden Url - ZyXEL Communications UAG4100 User Manual

The following table gives an overview of the objects you can configure.
Table 103 Configuration > Web Authentication > Walled Garden
LABEL
Enable Walled
Garden
Walled Garden
Summary
Add
Edit
Remove
Activate
Inactivate
Move
#
Status
Display
Name
URL
Apply
Reset

24.3.1 Adding/Editing a Walled Garden URL

Click Configuration > Web Authentication and then the Add (or Edit) icon in the Walled
Garden Summary section to open the Add/Edit Walled Garden URL screen. Use this screen to
configure a walled garden web site address entry.
Note: You can configure up to 20 walled garden URL links.
Figure 159 Configuration > Web Authentication > Walled Garden > Add/Edit
Chapter 24 Web Authentication
DESCRIPTION
Select this to turn on the walled garden feature.
Note: This feature works only when you set web authentication to Web Portal.
Use this table to manage the list of walled garden links.
Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To move an entry to a different number in the list, click the Move icon. In the field that
appears, specify the number to which you want to move the interface.
This field is a sequential value, and it is not associated with any entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This icon is lit when the web site link is set to display in the user login screen.
This field displays the descriptive name of web site.
This field displays the address of web site.
Click this button to save your changes to the UAG.
Click this button to return the screen to its last-saved settings.
UAG4100 User's Guide
234