9.1 Overview
Use the Wireless screens to configure how the UAG manages the Access Points (APs) that are
connected to it.
9.1.1 What You Can Do in this Chapter
• The Controller screen
the network.
• The AP Management screen
UAG.
9.2 Controller Screen
Use this screen to set how the UAG allows new APs to connect to the network. Click Configuration
> Wireless > Controller to access this screen.
Figure 71 Configuration > Wireless > Controller
C
(Section 9.2 on page
108) sets how the UAG allows new APs to connect to
(Section 9.3 on page
UAG4100 User's Guide
108
H A PT ER
Wireless
109) manages all of the APs connected to the
9