ZyXEL Communications UAG4100 User Manual page 61
Unified access gateway
Hide thumbs
Also See for UAG4100:
- User manual (451 pages) ,
- Application note (67 pages) ,
- Support notes (60 pages)
Table of Contents
Advertisement
Figure 39 WAN and ISP Connection Settings: (PPTP Shown)
The following table describes the labels in this screen.
Table 11 WAN and ISP Connection Settings
LABEL
DESCRIPTION
ISP Parameter
This section appears if the interface uses a PPPoE or PPTP Internet connection.
Encapsulation
This displays the type of Internet connection you are configuring.
Authentication
Use the drop-down list box to select an authentication protocol for outgoing calls.
Type
Options are:
CHAP/PAP - Your UAG accepts either CHAP or PAP when requested by this remote
node.
CHAP - Your UAG accepts CHAP only.
PAP - Your UAG accepts PAP only.
MSCHAP - Your UAG accepts MSCHAP only.
MSCHAP-V2 - Your UAG accepts MSCHAP-V2 only.
User Name
Type the user name given to you by your ISP. You can use alphanumeric and -_
characters, and it can be up to 31 characters long.
Password
Type the password associated with the user name above. Use up to 64 ASCII characters
except the [] and ?. This field can be blank.
Retype to
Type your password again for confirmation.
Confirm
Nailed-Up
Select Nailed-Up if you do not want the connection to time out.
Chapter 5 Quick Setup Wizards
UAG4100 User's Guide
61
@$./
Advertisement
Table of Contents
Troubleshooting
