Mac Filter List - ZyXEL Communications UAG4100 User Manual

Table 150 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL
Idle Timeout
Group Key Update
Timer
Pre-Authentication
OK
Cancel

32.3.5 MAC Filter List

This screen allows you to create and manage security configurations that can be used by your
SSIDs. To access this screen click Configuration > Object > AP Profile > SSID > MAC Filter
List.
Note: You can have a maximum of 32 MAC filtering profiles on the UAG.
Figure 212 Configuration > Object > AP Profile > SSID > MAC Filter List
The following table describes the labels in this screen.
Table 151 Configuration > Object > AP Profile > SSID > MAC Filter List
LABEL
Add
Edit
Remove
Object Reference Click this to view which other objects are linked to the selected MAC filtering profile (for
#
Profile Name
Filter Action
Chapter 32 AP Profile
DESCRIPTION
Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Enter the interval (in seconds) at which the AP updates the group WPA encryption key.
This field is available only when you set Security Mode to wpa2 or wpa2-mix and
enable 802.1x authentication.
Enable or Disable pre-authentication to allow the AP to send authentication
information to other APs on the network, allowing connected wireless clients to switch
APs without having to re-authenticate their network connection.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to add a new MAC filtering profile.
Click this to edit the selected MAC filtering profile.
Click this to remove the selected MAC filtering profile.
example, SSID profile).
This field is a sequential value, and it is not associated with a specific profile.
This field indicates the name assigned to the MAC filtering profile.
This field indicates this profile's filter action (if any).
UAG4100 User's Guide
319