ZyXEL Communications UAG4100 User Manual page 63

Figure 40 Interface Wizard: Summary WAN (Ethernet Shown)
The following table describes the labels in this screen.
Table 12 Interface Wizard: Summary WAN
LABEL DESCRIPTION
Encapsulation This displays what encapsulation this interface uses to connect to the Internet.
Service Name This field only appears for a PPPoE interface. It displays the PPPoE service name specified
in the ISP account.
Server IP This field only appears for a PPTP interface. It displays the IP address of the PPTP server.
User Name This is the user name given to you by your ISP.
Nailed-Up If No displays the connection will not time out. Yes means the UAG uses the idle timeout.
Idle Timeout This is how many seconds the connection can be idle before the router automatically
disconnects from the PPPoE server. 0 means no timeout.
Connection ID If you specified a connection ID, it displays here.
WAN Interface This identifies the interface you configure to connect with your ISP.
Zone This field displays to which security zone this interface and Internet connection will belong.
IP Address This field displays whether the WAN IP address is static or dynamic (Auto).
Assignment
IP Address This field displays the WAN IP address.
IP Subnet Mask This field only appears for an Ethernet interface. It displays the interface's IP subnet mask.
Gateway IP This field only appears for an Ethernet interface. It displays the IP address of the gateway.
Address
First DNS Server If the IP Address Assignment is Static, these fields display the DNS server IP
address(es).
Second DNS
Server
Close Click Close to exit the wizard.
Chapter 5 Quick Setup Wizards
UAG4100 User's Guide
63