Misfeed At Tray 2 Media Feed Section - Konica Minolta bizhub C35P Service Manual

Field Service Ver. 1.0 May 2010
11.4.5

Misfeed at tray 2 media feed section

A. Detection timing
Type
Detection of • The media does not unblock the registration sensor (PS5) even after the lapse
misfeed at tray 2
media feed section
B. Action
Registration sensor (PS5)
Tray2 media feed clutch (CL1)
Step
1 Initial check items
2 Check the connector between M2-PRCB
PJ11 for proper connection and correct as
necessary.
3 Check the M2 connector for proper drive
coupling and correct as necessary.
4 Check the connector between PS5-PRCB
PJ23 for proper connection and correct as
necessary.
5 Check the connector between CL1-PRCB
PJ16 for proper connection and correct as
necessary.
6 PS5 sensor check
7 CL1 operation check
8 M2 operation check
9 Change PRCB.
of a given period of time after the tray2 media feed clutch (CL1) is turned ON.
Relevant electrical parts
Action
Description
Printer control board (PRCB)
Main motor (M2)
WIRING DIAGRAM
Control signal
-
-
-
-
-
PRCB PJ23-3 (ON)
PRCB PJ16-2 (REM)
PRCB PJ11-10 to 13
-
11. JAM DISPLAY
Location (electri-
cal component)
-
-
-
-
-
K-15
A-7
C-15
-
141