Loading A Saved Preset - Roland Texart RT-640 User Manual

[ADJUST BI-DIR SIMPLE SETTING]
[ADJUST BI-DIR DETAIL SETTING]
[CALIBRATION]
[SHEET TYPE], [SHEET WIDTH], [SHEET POS.]
[SCAN INTERVAL]
[VACUUM POWER]
[FULL WIDTHS]
[SIDE MARGIN]
[MEDIA RELEASE]
P. 87"Loading a Saved Preset"


Loading a Saved Preset

Procedure

Press .


Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned,
you select from among NAME1 through NAME8.) If you load a preset while
starts flashing. After that, when the setup operation is complete,
 P. 88"Correcting for Misalignment in Bidirectional
Printing"
 P. 89"Correcting for Misalignment in Bidirectional
Printing More Precisely"
 P. 89"Alleviating Horizontal Bands (Feed Correc-
tion Function)"
 P. 92"Using Transparent Media"
 P. 94"Using Hard-to-dry Media"
 P. 94"Using Media that does not Move Smoothly"
 P. 95"Changing the Range of Print-head Carriage
Movement"
 P. 96"Expanding the Printing Area by Reducing
the Margins"
 P. 98"Using Sticky Media"
Press to display the screen on the left.
Press twice.
Press or
you want to load.
Press to confirm.
The settings are changed and the screen shown on the left appears.
Fully Utilizing the Preset Function
to select the name of the preset
is steadily lit,
returns to a steadily lit state.
4
87