Loading A Saved Preset; Assigning A Name To A Preset - Roland LEC-540 User Manual

[PRINT-CUT ADJ.]
[CROP-CUT ADJ.]
 P. 123, "Loading a Saved Preset," p. 123, "Assigning a Name to a Preset"

Loading a Saved Preset

Procedure

Press .

MENU
PRESET

LOAD
NAME1
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned,
you select from among NAME1 through NAME8.) If you load a preset while
goes dark. When starting output, press

Assigning a Name to a Preset

Procedure

Press .

MENU
PRESET

PRESET
NAME

NAME
NAME1
Continued on the next page.
 P. 140, "Correcting Misalignment of the Printing
and Cutting Positions"
 P. 149, "Correcting Misalignment for Printing
and Cutting When Using Crop Marks"
Press to display the left figure.
Press twice.
Press to select a name to be called.
Press to enable the setting.
The settings are changed and the screen shown in the figure ap-
pears.
again to make the output operation available.
Press to display the left figure.
Press and then
Press .
Press to select one of NAME1 through
8.
Press .
Fully Utilizing Preset Function
is illuminated,
.
5
123