Loading A Saved Preset - Roland Soljet EJ-640 User Manual

[PRE] (Preheater), [PRINT] (Print heater), [DRYER]
[PREHEATING]
[FEED FOR DRY]
[DRYING TIME]
[ADJUST BI-DIR SIMPLE SETTING]
[ADJUST BI-DIR DETAIL SETTING]
[CALIBRATION]
[SHEET TYPE], [SHEET WIDTH], [SHEET POS.]
[SCAN INTERVAL]
[VACUUM POWER]
[FULL WIDTH S]
[SIDE MARGIN]
[MEDIA RELEASE]
 P. 83, "Loading a Saved Preset"

Loading a Saved Preset

Procedure

Press .

MENU
PRESET

LOAD
NAME1
PRESET
LOAD

Press , then
 P. 86, "Making the Temperature Setting for the
Media Heating System"
 P. 87, "Controlling the Media Heating System dur-
ing Preheating"
 P. 88, "Drying the Trailing Edge of the Printing
Area on the Dryer"
 P. 89, "Setting the Drying Time after Printing"
 P. 91, "Correcting for Misalignment in Bidirectional
Printing"
 P. 91, "Correcting for Misalignment in Bidirectional
Printing More Precisely"
 P. 92, "Alleviating Horizontal Bands (Feed Correc-
tion Function)"
 P. 96, "Using Transparent Media"
 P. 98, "Using Hard-to-dry Media"
 P. 98, "Using Media That Wrinkles Easily/Does Not
Move Smoothly"
 P. 99, "Changing the Range of Print-head Carriage
Movement"
 P. 100, "Expanding the Printing Area by Reducing
the Margins"
 P. 102, "Using Sticky Media"
Press to display the screen shown on the left.
Press twice.
Press or
you want to load.
Press to confirm your entry.
The settings are changed and the screen shown in the figure appears.
to go back to the original screen.
Fully Utilizing the Preset Function
to select the name of the preset
4
83