Rebooting Faxfinder; Restoring Factory Defaults; Restoring Configuration - Multitech FaxFinder FF240-IP Administrator's Manual

Field
Direction
Fax Number
Time
Size
Pages
Resolution
Action

Rebooting FaxFinder

Reboot stops any faxes in process. FaxFinder cannot send or receive faxes during the reboot process.
To immediately reboot FaxFinder:
1. Click System Configuration > Reboot.
2. Click Reboot to log off the current user and restart the FaxFinder.

Restoring Factory Defaults

To restore the factory default settings:
1. Click System Configuration > Save/Restore.
2. Click Restore Factory Defaults to reset all FaxFinder settings. FaxFinder asks you confirm the restore and
reboot FaxFinder. Click OK to confirm or click Cancel.

Restoring Configuration

If you created a restore file, use Restore Config to reset FaxFinder using the .BIN file. This overwrites current
settings with the settings in place at the time the restore file was created. You will lose any configuration changes,
including user information, entered after the restore file was created. To create restore points, refer to Creating a
Restore File.
1. Click System Configuration > Save/Restore.
2. Click Browse and select a configuration .BIN file.
3. Click Restore. FaxFinder prompts you to reboot.
®
FaxFinder FF240-IP Administrator Guide
Description
Indicates if the fax was inbound or outbound.
The destination fax number.
The date and time the log entry was created.
The size of the entire fax transmission.
Number of pages faxed for this log entry.
The resolution used to send the fax. The default resolution is Fine.
When populated, this field has a Details link which will open a pop-up window with fax
details.
FAX MANAGEMENT
35