Rebooting Faxfinder; Restoring Factory Defaults - Multitech FaxFinder FF240-IP Administrator's Manual

FAX MANAGEMENT
Field
Status
Start Time
End Time
Sender
Recipient
Fax
Phone
Organization
Pages
Details
Call Log
Channel
Status
Direction
Fax Number
Time
Size
Pages
Details

Rebooting FaxFinder

Reboot stops any faxes in process. FaxFinder cannot send or receive faxes during the reboot process.
To immediately reboot FaxFinder:
1. Click System Configuration > Reboot.
2. Click Reboot to log off the current user and restart the FaxFinder.

Restoring Factory Defaults

To restore the factory default settings:
1. Click System Configuration > Save/Restore.
2. Click Restore Factory Defaults to reset all FaxFinder settings. FaxFinder asks you confirm the restore and
reboot FaxFinder. Click OK to confirm or click Cancel.
36
Description
Final state of the outgoing fax listed. States include: Sent, Aborted, and Failed.
Date and time the transmission started.
Date and time the transmission completed.
Username of the person sending the fax.
Name entered as the intended fax recipient.
Appears when you point to a Recipient. The number where the fax was sent.
If available, appears when you point to a Recipient. The recipient's phone number.
If available, appears when you point to a Recipient. Name entered as the fax recipient's
organization.
The number of pages sent with this fax.
Click to display Outbound Fax Log Details in a new window.
The channel used by the fax
Channel status for this log entry, pass or fail. If the fax failed, point to the log entry to
display the failure's cause.
Indicates if the fax was inbound or outbound.
The destination fax number.
The date and time the log entry was created.
The size of the entire fax transmission.
Number of pages faxed for this log entry.
Click to display Call Log Details in a new window.
®
FaxFinder Fax Server FF240-IP Administrator Guide