Rebooting Faxfinder; Restoring Factory Defaults; Restoring Configuration - Multitech FaxFinder FF240 Administrator's Manual

Field
#
Port
Status
Direction
Fax Number
Dialed Fax Number Number dialed after dialing rules, if any, have been applied.
Time
Size
Pages
Details

Rebooting FaxFinder

Reboot stops any faxes in process. FaxFinder cannot send or receive faxes during the reboot process.
To immediately reboot FaxFinder:
1. Click System Configuration > Reboot.
2. Click Reboot to log off the current user and restart the FaxFinder.

Restoring Factory Defaults

To restore the factory default settings:
1. Click System Configuration > Save/Restore.
2. Click Restore Factory Defaults to reset all FaxFinder settings. FaxFinder asks you confirm the restore and
reboot FaxFinder. Click OK to confirm or click Cancel.

Restoring Configuration

If you created a restore file, use Restore Config to reset FaxFinder using the .BIN file. This overwrites current
settings with the settings in place at the time the restore file was created. You will lose any configuration changes,
including user information, entered after the restore file was created.
To create restore points, refer to Creating a Restore File.
1. Click System Configuration > Save/Restore.
2. Click Browse and select a configuration .BIN file.
3. Click Restore. FaxFinder prompts you to reboot.
®
FaxFinder Fax Server FF240, FF440, FF840 Administrator Guide
Description
A sequential number associated with each internal modem based on the FaxFinder
model: 1-2 for the FF240, 1-4, for the FF440, and 1-8 for the FF840. If using an
Expansion Module, 8 or 16 additional modems are listed.
Shows the modem number by unit. The first number indicates the server or expansion
module. The second number indicates which modem in that unit. If you only have one
fax server, the first number is always 1.
Modem status for this log entry, pass or fail. If the fax failed, point to the log entry to
display the failure's cause.
Indicates if the fax was inbound or outbound.
Destination fax number.
Date and time the log entry was created.
Size of the entire fax transmission.
Number of pages faxed for this log entry.
Click to display Call Log Details in a new window.
FAX MANAGEMENT
47