Multiple Options Example - Multitech FaxFinder FF240-IP Administrator's Manual

T.37 ADVANCED USAGE
Example: FAX=5551234/FAX-PRIORITY=5@example.test
RECEIPT=always|failure|never
Controls when an email receipt for the fax is sent to the sender:
■
Always means send an email receipt for successful and failed faxes.
■ Failure means only send a receipt if the fax failed to send.
■ Never means don't send any receipt.
Example: FAX=5551234/RECEIPT=failure@example.test
RECEIPT-ATTACHMENT=pdf|tiff|none
Determines the receipt format and if FaxFinder sends email receipts to the sender.
■ PDF attaches the sent fax in PDF format to any email receipts.
■
Tiff attaches the sent fax in TIFF format.
■
None does not attach the sent fax.
Example: RECEIPT-ATTACHMENT=pdf

Multiple Options Example

The following example shows the format to use when combining multiple variants for sending a fax. Using these
commands overrides the settings on the T.37 configuration page.
Parameters
Send a fax to the phone number 111-555-1234 with a cover page noting the recipient as "John Smith" at the
company "Multi-Tech".
String of T.37 options:
FAX=111-555-1234/COVER-PAGE-ENABLED=true/ATTN=John Smith/ORG=Multi-Tech@example.test
Relaying
To send faxes through an MTA such as mail.multitech.com, then mail.multitech.com needs to be configured to
forward mail to the FaxFinder for a domain that FaxFinder will accept mail for.
For most mail servers, if the email's domain can be successfully resolved, the mail server will forward mail to that
destination without any extra configuration.
64
®
FaxFinder FF240-IP Administrator Guide