Technical Specifications - Multitech FaxFinder FF240-IP Administrator's Manual

PRODUCT OVERVIEW

Technical Specifications

Category
Physical Description
Dimensions
Weight
Connectors
Connectors
Power Requirements
Input Voltage
1
Power Draw
Environment
Operating Environment
Storage Environment
Relative Humdity
Fax Specifications
Maximum T.38 Ports
Web Connections
6
File Upload Size
Certifications
EMC Approvals
Safety Approvals
1
Multi-Tech Systems, Inc. recommends that the customer incorporate a 10% buffer into their power source when
determining product load.
2
Typical is the current while the unit is powered up, but not sending or receiving faxes.
3
Maximum is the current while sending or receiving faxes.
4
Peak is the current while sending or receiving faxes.
5
UL Listed @ 40°C. Limited by power supply. UL Certification does not apply or extend to an ambient above 40°C
and has not been evaluated by UL for ambient greater than 40°C. This product is intended to be supplied by a
Listed Power Unit marked L.P.S. or Class 2 and rated 12 VDC 5A.
8
W 9.1 in x H 1.9 in x D 6.1 in (W 23.2 cm x H 4.7 cm x D 15.5 cm) Note that adding the
plastic feet increases the height to 1.877 in
2.6 lbs (1.2 kg)
1 RJ-45 console serial port
1 RJ-45 Ethernet port
2 USB ports (inactive)
12 Volt @ 5As
Current (AMPS)
Watts
-22° to 185° F (-30° to +60° C)
-40° to 185° F (-40° to +85° C)
20 to 90% noncondensing
8
50
48MB max for the Send Fax Web page; 36MB max for T.37, Client software and API
FCC Part 15 Class A, EN 55022 Class A, EN 55024
UL\cUL 60950-1 ed.2, IEC 60950-1 ed.2 & EN (2006 +am.11)
Description
2
Typical Maximum
0.870 0.955
10.65 11.65
5
FaxFinder
3 4
Peak
15.40
®
FF240-IP Administrator Guide