Table of Contents
Advertisement
2.
KX-TA624
15
16
TEST: Press the INTERCOM button and then [107]. If the VPS
answers, you have an APT connection.
Set the DIP Switch to position 0 after initialization is complete.
The required programming is complete and the VPS and KX-TA624 should be able to communicate
through Digital Integration.
When running the Quick Setup command (Section 5 CUSTOMIZING THE SYSTEM) from the VPS,
the PBX transmits the station information automatically. This saves time when programming the
VPS.
4.2 CONNECTING THE VPS WITH THE PANASONIC KX-TA624
Change the extension numbers of both VPS port 1 and 2 for VPS2 from 107
and 108 to 115 and 116 (see "Extension No. of the VPS port 1-2" in Table
B-52 in B7.3 PBX Interface Parameters).
Extension 106
6
7
8
Mailbox for Extension 106
VPS1
Extension 107
Extension 108
VPS2
Extension 115
Extension 116
Port 1
Port 2
Port 1
Port 2
Installation Manual
91
Advertisement
Table of Contents
Troubleshooting
