Panasonic KX-TVS95 Installation Manual page 267

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
Table B-6
Parameter
Envelope 1. Before
2. After
Information
3. None
Position
Time and Date 1. Before
2. After
Stamp Position
3. None
Caller ID Callback 1. Yes
2. No
Direct Mailbox 1. Yes
2. No
Access
Value Range
(Default)
Specifies the position of Envelope Information—the
name of the person who recorded/transferred a
message, or Caller ID Number information
(Before)
Before:
After:
None:
Note
If you want to skip this information, press 6 while
listening to it.
Specifies the position of Time and Date Stamp
Before:
(After)
After:
None:
Note
If you want to skip this information, press 6 while
listening to it.
If set to "Yes", a subscriber is able to call back the
message sender with the Caller ID number attached to
(No) the message.
If set to "Yes", a subscriber is able to directly enter
Subscriber Service. This is accomplished by calling a
(Yes) VPS extension directly from the subscriber's extension.
The Subscriber Service Access Code (" " and mailbox
number) need not be dialed. Password entry may be
required if specified beforehand.
Note
The Direct Mailbox Access feature is available if
APT/DPT Voice Mail Integration is activated with a
Panasonic KX-TA624 or other KX-T series
telephone system.
Description/Function
The VPS announces Envelope Information
before playing the recorded/transferred
message.
The VPS announces Envelope Information
after playing the recorded message.
The VPS does not announce Envelope
Information.
The VPS announces Time and Date Stamp
before playing the recorded/transferred
message.
The VPS announces Time and Date Stamp
after playing the recorded message.
The VPS does not announce Time and
Date Stamp.
Installation Manual 267