B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
B3
SYSTEM ADMINISTRATION—SETTING
COS (CLASS OF SERVICE) PARAMETERS
The COS-Class of Service parameters define the set of services that are available to mailbox
owners. A maximum of 64 (1-64) classes can be specified. A class of service number can be
assigned for each mailbox. More than 1 subscriber can share the same class of service.
•
COS number 63 is only available to the Message Manager while COS number 64 is
only available to the System Manager.
•
The procedure below determines the utilization of the following special features on a
COS basis:
•
•
•
•
•
•
•
To access the menu for Class of Service Numbers 1-64, follow the menu path as
shown:
System Administration Top Menu-1-2-COS No.(1-64)
Note
In Table B-6 and Table B-7, sub-parameters can be assigned only when the
corresponding authorization parameter is set to "Yes".
Class of Service Setting
COS Nos. 1-62 (for subscribers)
To access the menu for Class of Service Numbers 1-62 for subscribers, follow the
menu path as shown:
System Administration Top Menu-1-2-COS No.(1-62)
Remote Call Forward to CO (available for COS numbers 1-63)
Delete Message Confirmation (available for COS numbers 1-64)
Message Waiting Notification (available for COS numbers 1-63)
External Message Delivery (available for COS numbers 1-62)
Auto Forwarding (available for COS numbers 1-63)
Caller ID Callback (available for COS numbers 1-64)
Call Transfer to Outside (available for COS numbers 1-62)
Installation Manual
265