Table of Contents
Advertisement
5.5 SETTING MAILBOXES
Table 5-8
Parameter
Use Mode
No. of Retries
Busy Delay
Time
No Answer
Delay Time
Time Frame
1, 2
MON:
TUE:
WED:
THU:
FRI:
SAT:
SUN:
From Mailbox Setting Menu:
Enter The Number : = 1
Enter the Mailbox number: =
Program - Mailbox Setting - Enter/Edit Menu
1. Mailbox Setting
2. Notification Setting
3. Remote Call FWD to CO
Enter The Number : = 3
Program - Mailbox Setting - Enter/Edit - Remote Call FWD to CO
1. Telephone No.1 [ ] (0-9, )
Enter the telephone No.1 : =
2. Telephone No.2 [ ] (0-9, )
Enter the telephone No.2 : =
170
Installation Manual
Value Range
(Default)
1. Not Use
Specifies how Device 1, 2, or 3 is to be used. The
2. Continuously
subscriber can also specify the use mode from his
3. Scheduled
telephone.
(Continuously)
1. Not Use—Device 1, 2, or 3 is not used for a
notification call.
2. Continuously—Device 1, 2, or 3 is called whenever
a message is recorded in the mailbox.
3. Scheduled—Device 1, 2, or 3 is called on a schedule
basis when a message has been left in the mailbox.
0-9 times
Specifies the number of times that a notification call to
(0)
Device 1, 2, or 3 should be attempted after a busy or no
answer condition is received.
0-120 min
Specifies the time (in minutes) the VPS must wait after
(3)
a busy condition is received before making another
notification call to Device 1, 2, or 3.
60-120 min
Specifies the time (in minutes) the VPS must wait after
(60)
a no-answer condition is received before making
another notification call to Device 1, 2, or 3.
1-12: h
Specifies the daily schedule for the Message Waiting
Notification service for 1 week for this device.
00-59: min
AM/PM:
Note
a.m./p.m.
: All Day
Space: No Use
(No Use)
Description/Function
These parameters are active only when "Use
Mode" is set to "Scheduled".
Advertisement
Table of Contents
Troubleshooting
