Panasonic KX-TVS95 Installation Manual page 350

C3 SETTING COS (CLASS OF SERVICE) PARAMETERS
Auto Forwarding
31. a)
b)
c)
d)
e)
f)
g)
h)
350 Installation Manual
The current setting plays. Press [1] to change the setting (enable or disable).
If Auto Forwarding is enabled, go to Step 31b below.
The current forwarding destination mailbox number plays. Press [1] to
change the mailbox number.
Type the mailbox number.
Confirm the entry is correct and Press [2] to accept it.
The current delay time is played. Press [1] to change the setting. The delay
time is the period of time that the VPS must wait before forwarding messages.
For example, enter 115# to set the delay time to 1 h 15 min; 30# to set 30 min.
Confirm the entry is correct and Press [2] to accept it.
The current forwarding mode is played. Press [1] to change the setting (copy
or move).
Confirm the entry is correct and Press [2] to accept it. Return to Step 31a
above.