Panasonic KX-TVS95 Installation Manual page 332

B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS
Digit Translation Table Parameters
Use the Digit Translation Table to translate the Follow On ID Signal from the PBX into the
proper codes for the VPS. This translation table is only effective for the incoming signal.
To access the menu for Digit Translation Table Parameters, follow the menu path as
shown:
System Administration Top Menu-1-6-3-3
Digit Translation Table Parameters-Inter-Digit Timeout
To access the menu for Inter-Digit Timeout, follow the menu path as shown:
System Administration Top Menu-1-6-3-3-1
Table B-47
Parameter
Inter-Digit
Timeout
Digit Translation Table Parameters-Input/Output
To access the menu for Input/Output, follow the menu path as shown:
System Administration Top Menu-1-6-3-3-2
Table B-48
Parameter
Table Input digit
1-8
332 Installation Manual
Value Range
(Default)
1-4 s
(1)
Value Range
(Default)
Up to 8
digits
consisting of
Output
digit
0-9, , #,
A-D, S, K
(None)
Description/Function
Defines the incoming signal interval (Follow on ID). The
Digit Translation Table is translated by a series of signals
received within the specified time period.
Description/Function
Do not assign more than 1 code to an incoming
signal. If this occurs, the system will take the first
assignment.
Note
S: Skip (ignore) the code.
K: Keep the code as it is.
In each table, the number of "K" used for the
Input digit must be the same as the one used for
the Output digit.