Backing Up The System - Panasonic KX-TVS95 Installation Manual

6.3 BACKING UP THE SYSTEM

6.3 BACKING UP THE SYSTEM
1.
Choose the Utility Command. Type [SAVE], then Press ENTER. See screen output
below.
From System Administration Top Menu:
Enter The Number : = 3
Utility Command
$ SAVE
VPS Flash Memory Data Save ( VPS -> PC : Xmodem )
1: Program
2: Parameters
3: System Prompts
4: User Prompts-1
5: User Prompts-2
6: Custom Service Menus
7: Personal Greetings
8: Company Greetings
Select No. : = 2
2.
To start, Press [2] and then ENTER.
3.
Press RETURN or ENTER.
Following steps are for HyperTerminal as an example.
4.
Select Receive File from the Transfer Menu.
5.
Specify a folder where data is to be saved (if necessary, use "Browse").
6.
Select Xmodem as the protocol to save data.
7.
Click "Receive".
8.
Enter desired filename and click "OK".
The file transfer screen appears and shows download progress. Download time will
vary depending on the communication speed and file sizes.
"SAVE Completed" will appear on the screen when the file has been saved. Continue
saving the other items as needed. It is not necessary to save the "Program" because
it is resident on the flash memory (Master) and cannot be altered. We do recommend
all other data be saved including User Prompt 1 and User Prompt 2 (if they have been
recorded).
Notes
Recorded caller names for the Caller Name Announcement (System/Personal) cannot be
saved by the above procedure, only Caller ID numbers can be saved. When the saved
182 Installation Manual